PLATE SET, CLUTCH FRICTION - GT380, GT250, GT250 X7, TS250 (PATTERN)

DESCRIPTION: Clutch friction plate set. 6 plates supplied.

NOT FOR GT250 K & L MODELS.

These plates must be soaked in oil BEFORE installation. Be sure to follow the installation guidelines. Complete engine sets of stack height controlled friction plates featuring the EBC unique alloy particle impregnated clutch facings that prevent burn up or slippage. Every CK kit is matched and measured to give you a perfect stack height. NEVER try to fit individual plates is the EBC recommendation.

For springs, see below.

CONDITION: New, genuine EBC part.

PART NUMBER: EBC CK3315. Replaces 21441-16500.

FITS MODEL(S): GT380 ALL, GT250 M TO C, GT250 X7 ALL.

Which oil should I use? Important notes
Drive case OIL is extremely important and riders should never use ATF (Automatic transmission fluid) which has been tried in the past to reduce oil drag and gain half a horsepower. It does reduce drag and it does give you a tiny HP gain but it RUINS your clutch in minutes. ALWAYS use the bike manufacturer’s oil recommendation and FILL TO THE RIGHT LEVEL. Another not so clever trick used to gain a tiny power increase is to reduce the oil level in the drivecase, oils must COOL the clutch as well as lubricate it, so never cut corners here and NEVER put additives of any sort in drivecase oil which cause plates to stick and glaze, ruining your clutch.

MODEL YEARS AND DATES ARE APPROXIMATE

Please note that we have tried our best to indicate the correct model and model year, but it could be wrong. Please check that the part number is suitable for your machine before you order.